EDTA Purple Or Lavender Cap

EDTA Purple Or Lavender Cap

Nidovac™ EDTA tubes are available in both di-potassium (K2) & tri-potassium (K3) salts. the concentration for EDTA is as per the CLSI standard ( 1.8 mg/ml)

Nidovac™ EDTA tubes anticoagulant is uniformly coated by Ultrasonic spray coating techniques. Uniform spray dry coating helps in proper dispersion of EDTA throughout the tube hence ensure good anti-coagulant and blood cohesion upon mixing for specimen.,/p>

EDTA tube wall also undergoes BIONIC TREATMENT resulting in glass like smoothness on inner wall surface. All steps help for better cell stability, lesser micro-clot formation and reduced platelet aggregation (Platelet clumping).

Nidovac™ EDTA tubes guarantee more accurate cell count readings both on differential Cell-counters or Microscopic slides.

Mode of action:

EDTA as an anticoagulant as a chelating agent binds with the Calcium molecule making it unavailable for Coagulation process in sample for blood, hence stopping the Coagulation cascade. This gives a long lasting irreversible anti-coagulation effect to the blood sample.

Mixing: 6-8 times gentle inversion cycle

Common test:

  • Whole blood cell count test : CBC , Platelets , Haemoglobin , CD4 count etc
  • Diabetic HbA1c test
Code Volume Size Additive Packing
NV2K020 2.0 ml 13 x 75 mm K2 -EDTA 100 x 12
NV2K030 3.0 ml 13 x 75 mm K2 -EDTA 100 x 12
NV2K040 4.0 ml 13 x 75 mm K2 -EDTA 100 x 12
NV2K050 5.0 ml 13 x 100 mm K2 -EDTA 100 x 12
NV2K050 6.0 ml 13 x 100 mm K2 -EDTA 100 x 12
NV2K100 10.0 ml 16 x 100 mm K2 -EDTA 100 x 10
NV3K020 2.0 ml 13 x 75 mm K3 -EDTA 100 x 12
NV3K030 3.0 ml 13 x 75 mm K3 -EDTA 100 x 12
NV3K040 4.0 ml 13 x 75 mm K3 -EDTA 100 x 12
NV3K050 5.0 ml 13 x 100 mm K3 -EDTA 100 x 12
NV3K100 10.0 ml 16 x 100 mm K3 -EDTA 100 x 10
NV2KM05 0.5 ml Micro Tube K2 -EDTA 100 x 10

 

Note:

For the making of Microscopic slide always use FRESH well-mixed EDTA (with a maximum delay of up to 3 or 4 h) after sample collection. In event requiring EDTA tubes to be stored overnight please keep the sample at 4°c.